Plastic bottle making 0.5L- 2L 6000BPH Automatic Blow Moulding Machine
This is full electric high speed PET bottle blowing machine,servo motor driven the stepping system,stretching system as well as
the mould clamping system.Machine doesn't need to be equipped the low pressure air compressor again,saving the cost in the
LP compressor part,at the same time saving at least 23KW/h on the electricity consumption,make the profit maximization for
you.
Performance and Advantages
i. The man-machine interface is easy to operate. Everything is computerized, including temperature adjustment and preform
distribution.
ii. Preform unscrambling, loading, bottle handling and ordering are all operated by stainless steel manipulator automatically
without a second contamination.
iii. The circulating chilling water system can protect the bottle neck against deformation when the preform is being heated.
iv. The homothermal heater adopts auto reflection and closed loop adjusting system which have the power supplied constantly
in proportion, not affected by the fluctuation of voltage. The conveying chain is short pitched and paratactic, which helps to
realize slow heating and low power consumption. As a result, the preform can be heated evenly and easy to blow.
iv. The positioned installation of molds makes it possible to change molds easily within 30 minutes.
v. All the critical parts we use for the machines, such as the electrical, pneumatic components, servo motor, etc, are famous
branded parts imported from Japan, USA and Europe,which ensures the stability and long life of our equipments.
Easy Maintenance
Since the machine is connected to the programmable logic controller (PLC) via particular communicating cables, the user can
manage all the actions of the machine through the PLC, which will send warning signals and the problem diagnosis report to
the operators when there is something wrong with the machine. Accordingly, the operators can easily find out the causes that
lead to the problems through the indications shown and fix them quickly.
Safety
BLMS-6000 is equipped with following mechanic and electric protecting devices in order to assure the safety of operators and
durable stable operation of the machine.
i. The safety of operators
The machine is totally enclosed with perfect reliable safety door and also equipped with aluminum antislip plate on the principal
surface, which can assure operators' safety to the largest degree.
ii. The safety of the machine
The multiple points detection technique is adopted to ensure the safe running of the positioning system, the clamping system
and the stretching system to the largest degree.
Technical Parameter
| Items |
Unit |
Model |
| BLMS-6000-2L |
| Molding Spec. |
Cavity Pitch |
mm |
114 |
| Preform Heating Pitch |
mm |
114 |
| No.of Cav. |
Cav. |
4 |
| Container Spec. |
Max.Container Volume |
L |
2 |
| Neck Diameter Range |
mm |
18-38 |
| Max.Containr Diameter |
mm |
108 |
| Max.Containr Height |
mm |
320 |
| ※※Theoretical Output |
bph |
6000~4800 |
| Power Spec. |
Rated Power |
KW |
80 |
| Power Consumption |
KW |
45~55 |
| Compressor Spec. |
Blowing Pressure |
Mpa |
2.5~3.2 |
| Air Consuming |
m³/min |
6 |
| Whole Machine Spec. |
Size |
mm |
5191*4864*3200 |
| Weight |
Kg |
5600 |
| Note: Due to continuous technical development specification would be improved without prior notice. |
| Special designs correspond to customers needs. |
Product Tags:
|
|
0.5L-2L 6000BPH Automatic Blow Moulding Machine Plastic Bottle Making Images
|
